Home : 32mm : Hardware :
I usually use 24mm bolts. The only 24mm panel joining bolt Hafele has is a jointed double-ended one. While I could get one shorter than the 84mm one shown, this one works out well (48.25, on my boring machine scale, for both end and face boring). These fit pretty snug in a 7mm hole.
Application example: Joining trim
Hafele catalog entry
[ comment | link | top ]
My introduction to 32mm cabinetmaking was closets assembled with Rafix connectors. I used to build all my cabinetry with these. No end boring required. Plastic or die-cast housing (e.g. Nickel and Bronze)
[ comment | link | top ]
Connectors
Minifix double-ended bolt
I usually use 24mm bolts. The only 24mm panel joining bolt Hafele has is a jointed double-ended one. While I could get one shorter than the 84mm one shown, this one works out well (48.25, on my boring machine scale, for both end and face boring). These fit pretty snug in a 7mm hole.Application example: Joining trim
Hafele catalog entry
[ comment | link | top ]
Rafix
My introduction to 32mm cabinetmaking was closets assembled with Rafix connectors. I used to build all my cabinetry with these. No end boring required. Plastic or die-cast housing (e.g. Nickel and Bronze)
[ comment | link | top ]